PCM Marble Granite Steel Sheet Coil PVDF Printech Color Coil
50-Year Warranty Color Coated Coil
Product Introduction Section
Color coated aluminum sheet in coils has the characteristics of long service life, light weight, excellent surface effect and high recycling value, and has good economic benefits to meet the urgent demand of the current social economy and environmental protection development.
Our factory's aluminum color coating production line uses Germany's Siemens complete line control system, and the core painting process uses the world's most advanced German roll coating technology and twice-coated, twice-hot air-curing coating technology to accurately control coating thickness and curing quality.
1060 Pure Aluminum Series
The 1060 aluminum plate is part of the pure aluminum series, with a density of 2.71. It is relatively soft and highly ductile, offering excellent forming and processing characteristics. It also boasts high corrosion resistance, a long service life, and low cost, though it has lower strength and rigidity.
3003 Aluminum-Manganese Alloy Series
The 3003 aluminum sheet belongs to the aluminum-manganese alloy series, with a density of approximately 2.73. Enhanced with manganese (1-1.5%), this material offers better hardness and tensile properties compared to the 1000 series. Known for its excellent anti-rust properties, it is often referred to as "anti-rust aluminum."
3004 Aluminum-Magnesium-Manganese Alloy Series
The 3004 aluminum plate includes both manganese and magnesium (0.8-1.3%), providing higher strength than the 3003 series. Referred to as "aluminum-magnesium-manganese," it is known for its excellent formability and corrosion resistance. This alloy is widely used in colored aluminum products and is common in public buildings such as airports, stations, and stadiums.
5052 Aluminum-Magnesium Alloy Series
The 5052 aluminum-magnesium alloy, with a density of 2.68, primarily consists of magnesium (3-5%). This series is characterized by low density, high tensile strength, and high elongation. Due to its light weight, the 5052 alloy is frequently used in the aviation industry and is known as "aviation aluminum." It offers superior tensile strength and performance compared to the 3000 series, though it comes at a higher cost.
| PRODUCT CATEGORY | Polyester PE Color coated Aluminum | Fluorocarbon / PVDF Color coated Aluminum |
| Aluminum thickness | 0.30-2.0mm | 0.30-2.0mm |
| Paint coating | Top ≥15μm | Top ≥25μm |
| thickness | Back≥5μm | Back≥5μm |
| MEK | ≥100 | ≥200 |
| T bending | ≤2T | ≤2T |
| Impact | 50kg.cm | 50kg.cm |
| Adhesion | 0 Grade | 0 Grade |
| Pencil Hardness | ≥2H | ≥2H |
| Boiling water proof | No change within 2 hours | No change within 2 hours |
| Typical Alloy | 1100, 1050, 1060, 3003, 3004, 3005, 3104, 3105 |
| Typical Status | H14, H16, H18, H24, H26 |
Wooden Printed Galvalume Steel Coils Coating Types
According to different environment and uses, we can choose the different appropriate resin coating.
1) Polyester(PE)
Good formability and adhesion, color is rich and various, superior durability in the outdoor, good chemical resistance
and low cost.
2) Silicon modified polyester(SMP)
Good wear resistance and heat resistance, as well as good exterior durability and resistance to pulverization, medium cost.
3) High durability polyester(HDP)
Anti-ultraviolet and excellent color retention, excellent resistance to pulverization, good adhesion, color is rich, good cost
performance.
4) Polyvinylidene fluoride(PVDF)
Strong performance of anti-ultraviolet, can stand against strong change of weather for long time and erosion for many kinds
of chemical medium, excellent solvent resistance,dirty resistance, color is limited and high cost.
| Thick | 0.14-2.0 mm |
| Width | 600-1500 mm |
| Coil ID | 508 / 610MM |
| Coil Weight | 3-8 Tons |
| Type Of Substruate | Hot dipped galvanized steel coil,galvalume steel coil,cold rolled steel |
| Coating Types | Top paint:PVDF,HDP,SMP,PE,PU
Primer paint:Polyurethane,Epoxy,PE
Back paint:Epoxy,Modified polyester |
| Standard | ASTM-A653; JIS G3302; EN10147;etc |
| Payment Terms | T/T, LC, Western Union, Paypal, O/A, DP |
| Regular Order | 25 tons or one container, for less quantity, to contact with us for details |
| Hardness | Soft hard(HRB60),medium hard(HRB60-85),full hard(HRB85-95) |
| Surface Structure | Regular spangle,Minimum spangle, Zero spangle, Big spangle |
| Surface Treatment | Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass |
Customized Patterns
Paint Suppliers & Partners:
We only choose the top-level paint suppliers for our pre-painted steel coils and sheets,
AkzoNobel, Sherwin-Williams Valspar, Beckers, PPG Industries, Nippon, KCC are our solid paint suppliers.
Their best paint materials decide our steel coils quality.
Package & Delivery Shipment :
Delivery time: 30 days deliver to loading port
Shipment Methods: Container, Breakbulk, Railway, Trucks
Projects
Product Tags:
|
|
PCM Marble Granite Steel Sheet Coil PVDF Printech Color Coil 50-Year Warranty Color Coated Coil Images
|
